Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 ユーザーズマニュアル
Configure Switching Information
230
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6.
Use Interface to select the physical interface.
7.
In the Multicast Router field, select Enable or Disable.
8.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure a Multicast Router VLAN
You can configure an interface to forward the snooped IGMP packets from a specific VLAN
only to the multicast router that is connected to the interface. The configuration is not needed
most of the time since the switch automatically detects a multicast router and forwards the
IGMP packets accordingly. It is needed only when you want to make sure that the multicast
router always receives IGMP packets from the switch in a complex network.
only to the multicast router that is connected to the interface. The configuration is not needed
most of the time since the switch automatically detects a multicast router and forwards the
IGMP packets accordingly. It is needed only when you want to make sure that the multicast
router always receives IGMP packets from the switch in a complex network.
To configure a multicast router VLAN:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Switching
> Multicast > IGMP Snooping > Multicast Router VLAN
Configuration
.