Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 ユーザーズマニュアル
OSPF and OSPFv3
377
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure an OSPFv3 Stub Area
To configure the OSPFv3 stub area:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing > OSPFv3 > Advanced > Stub Area Configuration.
6.
In the Area ID field, enter the OSPF area ID.
An area ID is a 32-bit integer in dotted-decimal format that uniquely identifies the area to
which a router interface connects.
7.
In the Import Summary LSAs list, select the Enable or Disable option.
If you select Enable, summary LSAs are imported into areas. The default is Enable.
8.
In the Default Cost field, enter the metric value to be applied for the default route advertised
into the stub area.
The valid values range from 1 to 16,777,215. This value is applicable only to stub areas.
9.
Click the Add button.
The area is configured as a stub area.
10.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.