Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 ユーザーズマニュアル
Manage Device Security
552
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6.
Select the storm control settings:
•
Select the Broadcast Storm Control All
Disable or Enable radio button.
This enables or disables Broadcast Storm Recovery mode on all ports. When you
specify Enable and the broadcast traffic on any Ethernet port exceeds the configured
threshold, the switch blocks (discards) the broadcast traffic. The factory default is
Enable.
specify Enable and the broadcast traffic on any Ethernet port exceeds the configured
threshold, the switch blocks (discards) the broadcast traffic. The factory default is
Enable.
•
Select the Multicast Storm Control All Disable
or Enable radio button.
This enables or disables Multicast Storm Recovery mode on all ports. When you
specify Enable, and the multicast traffic on any Ethernet port exceeds the configured
threshold, the switch blocks (discards) the multicast traffic. The factory default is
Disable.
specify Enable, and the multicast traffic on any Ethernet port exceeds the configured
threshold, the switch blocks (discards) the multicast traffic. The factory default is
Disable.
•
Select the Unknown Unicast Storm Control All
Disable or Enable radio button.
This enables or disables Unicast Storm Recovery mode on all ports. When you
specify Enable, and the unicast traffic on any Ethernet port exceeds the configured
threshold, the switch blocks (discards) the unicast traffic. The factory default is
Disable.
specify Enable, and the unicast traffic on any Ethernet port exceeds the configured
threshold, the switch blocks (discards) the unicast traffic. The factory default is
Disable.
7.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure Storm Control for a Port
To configure storm control for a port:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > Traffic Control > Storm Control > Storm Control Interface
Configuration.
Configuration.