Netgear M4300-28G (GSM4328S) - Stackable Managed Switch with 24x1G and 4x10G including 2x10GBASE-T and 2xSFP+ Layer 3 ユーザーズマニュアル

Use one of the following methods to display available interfaces on the page:

Select a Unit ID (1, 2, 3) to display a list of physical ports for the selected unit.

Select LAG to display LAGs only.

Select CPU to display CPUs only.

Select VLAN to display a list of available VLAN IDs.

Select All to display all physical ports, LAGs, CPUs, and VLANs.

Use one of the following methods to select an interface:

In the Go To Interface field, enter the interface in the unit/slot/port format and click on 
the Go button.

Next to the Interface column, select the check box for the interface that you want to 
use as the source, or select multiple check boxes to use all selected interfaces as 
sources.

Select from the Direction list to specify the direction of the traffic to be mirrored from the 

configured mirrored ports.

If the value is not configured, None is displayed. The default value is None.

. The value is not configured.

. Monitor transmitted and received packets.

. Monitor transmitted packets only.

. Monitor received packets only.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

Traffic of the selected interfaces is sent to the probe port.

The Status field indicates the interface status.



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select Monitoring > Mirroring > RSPAN Destination Switch Configuration.