Netgear FS728TPv2 - ProSAFE 24 Port 10/100 Smart Switch with 4 Gigabit Ports and 24 PoE Ports 管理者ガイド

Understanding the User Interfaces

The FS728TP Smart Switch software includes a set of comprehensive management 
functions for configuring and monitoring the system by using one of the following methods: 

Web user interface

Simple Network Management Protocol (SNMP)

Each of the standards-based management methods allows you to configure and monitor the 
components of the FS728TP Smart Switch software. The method you use to manage the 
system depends on your network size and requirements, and on your preference.

The FS728TP Smart Switch Software Administration Manual describes how to use the 
Web-based interface to manage and monitor the system. 

Using the Web Interface

To access the switch by using a Web browser, the browser must meet the following software 
requirements: 

HTML version 4.0, or later 

HTTP version 1.1, or later 

Java Runtime Environment 1.6 or later

Use the following procedures to log on to the Web interface:

Open a Web browser and enter the IP address of the switch in the Web browser 

address field. 

The factory default password is password. Type the password into the field on the login 

18, and then click Login. Passwords are case 

sensitive.

After the system authenticates you, the System Information page displays.

26 shows the layout of the Smart Switch Web interface.