Netgear FS728TPv2 - ProSAFE 24 Port 10/100 Smart Switch with 4 Gigabit Ports and 24 PoE Ports 管理者ガイド
98
|
Chapter 3: Configuring Switching Information
FS728TP Smart Switch Software Administration Manual
Rapid STP
Use the Rapid STP page to view information about Rapid Spanning Tree (RSTP) port status.
To display the Rapid STP page, click Switching > STP > Advanced
RSTP.
The following table describes the Rapid STP Status information displayed on the screen.
Click Refresh to update the information on the screen with the most current data.
MST Configuration
Use the Spanning Tree MST Configuration page to configure Multiple Spanning Tree (MST)
on the switch.
on the switch.
To display the Spanning Tree MST Configuration page, click Switching > STP > Advanced
MST Configuration
.
Field
Description
Interface
The physical or port channel interfaces associated with VLANs associated with the CST.
Role
Each MST Bridge Port that is enabled is assigned a Port Role for each spanning tree.
The port role will be one of the following values: Root Port, Designated Port, Alternate
Port, Backup Port, Master Port, or Disabled Port.
The port role will be one of the following values: Root Port, Designated Port, Alternate
Port, Backup Port, Master Port, or Disabled Port.
Mode
Specifies the spanning tree operation mode. Different modes are STP, RSTP, and MSTP.
Fast Link
Indicates whether the port is enabled as an edge port.
Status
The Forwarding State of this port.