Netgear M4100-D12G-POE+ (GSM5212P) - ProSAFE Gigabit L2+ Managed Switch ソフトウェアガイド
Switching Commands
96
M4100 Series ProSAFE
Managed
Switches
dot1x supplicant timeout start-period
Use this command to configure the start period timer interval in seconds to wait for the EAP
identity request from the authenticator.
identity request from the authenticator.
no dot1x supplicant timeout start-period
Use this command to set the start-period value to the default.
dot1x supplicant timeout held-period
Use this command to configure the held period timer interval in seconds to wait for the next
authentication on previous authentication fail.
authentication on previous authentication fail.
no dot1x supplicant timeout held-period
Use this command to set the held-period value to the default value.
dot1x supplicant timeout auth-period
Use this command to configure the authentication period timer interval in seconds to wait for
the next EAP request challenge from the authenticator.
the next EAP request challenge from the authenticator.
Default
30 seconds
Format
dot1x supplicant timeout start-period <1-65535>
Mode
Interface Config
Format
no dot1x supplicant timeout start-period
Mode
Interface Config
Default
30 seconds
Format
dot1x supplicant timeout held-period <1-65535>
Mode
Interface Config
Format
no dot1x supplicant timeout held-period
Mode
Interface Config
Default
30 seconds
Format
dot1x supplicant timeout auth-period <1-65535>
Mode
Interface Config