Netgear RD5200 (ReadyDATA 5200) – ReadyDATA 5200 System Empty Chassis with 10G (2 port SFP+ card) ソフトウェアガイド
System Maintenance and Monitoring
161
ReadyDATA OS 1.4
-
Update. Select how often the information in the graphic is updated. You can select
from 5 to 50 seconds.
from 5 to 50 seconds.
•
Network.
The Network throughput table shows the network usage for Tx and Rx traffic in bytes per
second. The range is flexible and depends on your selections from the drop-down lists
above the graphic. For example, the range can be from 0 to 60 bytes or from 0 to 40 KB.
The upper part of the graphic indicates the Rx traffic; the lower part of the graphic
indicates the Tx traffic.
second. The range is flexible and depends on your selections from the drop-down lists
above the graphic. For example, the range can be from 0 to 60 bytes or from 0 to 40 KB.
The upper part of the graphic indicates the Rx traffic; the lower part of the graphic
indicates the Tx traffic.
From the drop-down lists above the graphic, you can adjust the following settings:
-
Network. Select all network interfaces, individual interfaces, individual VNICs, or
individual aggregation links.
individual aggregation links.
-
Protocol. Select all protocols or individual protocols (SMB, NFS, AFP, HTTP, SSH,
iSCSI, or SNMP).
iSCSI, or SNMP).
-
Period. Select the period over which the network usage is measured. You can select
from five minutes to one year.
from five minutes to one year.
-
Update. Select how often the information in the table is updated. You can select from
5 to 50 seconds.
5 to 50 seconds.
•
ZFS ARC (Cache)
The ZFS ARC table and graph shows various metrics for the cache such as hits, misses,
l2 hits, and l2 misses. The ZFS ARC drop-down list (at the top of the graph) selects from
l2 hits, and l2 misses. The ZFS ARC drop-down list (at the top of the graph) selects from