Netgear EVA9150 – Digital Entertainer Elite ユーザーガイド

3-9

By default, the volume buttons control the volume for the device programmed on the selected 
device mode. To configure your remote so that the volume buttons always control a specific 
device (such as a TV), even if another device mode is selected, complete the following 
instructions. This chapter also includes instructions for overriding this setting for one or more 
devices, and for restoring the remote control to the default volume settings. 

To configure your remote so that the volume buttons always control a specific device (such as a 
TV), even if another device mode is selected:

1. Press and hold 

 

 

until the red LED blinks twice. 

2. Enter 9 9 3, and then press the mode button for the device you want to control volume (for 

example, TV). The LED blinks twice. 

Once set, volume is controlled for the configured device (for example, TV) even if another 
device mode is selected. 

If the volume is locked to a specific device (as described in the previous instructions), you can 
unlock the volume controls for the device. This allows you to control the volume for that device 
when the device mode is selected.

For example, you can set the remote to always control the TV, and then unlock the AUX device 
button so that you can control your stereo’s volume when the AUX mode is selected.

1. Press a device button, for eample, TV.

2. Press 

 

 

until the red LED blinks twice.

Note: The volume controls affect only programmed devices. See 

” for more information.