Netgear XAVB5201 - Powerline 500 Adapter インストールガイド

ページ / 2
Installation Guide
This symbol was placed in accordance with the European Union Directive 
2002/96 on the Waste Electrical and Electronic Equipment (the WEEE 
Directive). If disposed of within the European Union, this product should be 
treated and recycled in accordance with the laws of your jurisdiction 
implementing the WEEE Directive.
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or 
registered trademarks of NETGEAR, Inc. in the United States and/or other countries. 
Information is subject to change without notice.Other brand and product names are 
trademarks or registered trademarks of their respective holders. ©2012 by NETGEAR, Inc. 
All rights reserved. 
May 2012
LED and Button Descriptions
Item
Description
Power 
LED
• Solid green. The electrical power is on.
• Solid amber. The adapter is in power saving 
mode.
• Blinking green. The adapter is in the process of 
setting up security.
• Off. There is no electrical power.
Power-
line LED
• Solid. The adapter is connected to a Powerline 
network.
• Off. The adapter has not found any other 
compatible Powerline devices using the same 
encryption key.
The Pick A Plug feature lets you pick the electri-
cal outlet with the strongest link rate, indicated by 
the color displayed by the LED:
Green: Link 
rate > 80 
Mbps (Best)
Amber: Link rate 
> 50 and < 80 
Mbps (Better)
Red: Link 
rate < 50 
Mbps(Good)
Powerline LED
Power LED
Ethernet LED
Reset
Security
Ethernet port
Factory
button
Powerline 500 (2-pack) 
XAVB5201
Troubleshooting Tips
Power LED is off
Make sure that power is supplied to the electrical 
outlet, and that the Powerline devices are not plugged 
into an extension cord, power strip, or surge protector.
Power LED is 
amber
Power saving mode occurs when the Ethernet LED is 
off. This can occur when:
• The Ethernet cable is unplugged. 
• The device connected through the Ethernet cable is 
turned off. 
• The adapter is idle for 10 minutes. 
It returns to normal mode within 2 seconds once the 
Ethernet link is up.
Powerline LED 
is off
• If you have set network security, make sure that all 
Power line devices are using the same encryption 
key; see the online 
User Manual for details.
• Press the Reset button on each device for 1 second 
to return the Powerline adapter to its factory default 
settings. 
Powerline LED 
is amber or red
Move the Powerline device to a closer location.
Ethernet LED is 
off
• Make sure that the Ethernet cables are working and 
securely plugged into the devices.
• Press the Reset button on each device for 1 second 
to return the Powerline adapter to its factory default 
settings. 
  Package Contents
Warning: Do not press the Security button on the Powerline 
adapter until installation is complete and the adapters are 
communicating with each other (indicated by the blinking 
Powerline LED). Pressing this button too soon can temporarily 
disable Powerline communication. If this should occur, use the 
Factory Reset button to return the Powerline adapter to its 
factory default settings.
Ethernet 
LED
• Solid. The Ethernet port is linked.
• Off. There is no Ethernet connection.
Security 
button
After you plug in your new AV adapter, press the 
Security button for 2 seconds, then press the 
security button on one of the other AV adapters in 
your existing network for 2 seconds. Both buttons 
must be pressed within 2 minutes. 
Note: The Security button does not work in power 
saving mode (see “Power LED is amber” in the 
Troubleshooting Tips table).
Factory 
Reset
Press the Reset button for 1 second, then release 
it to return the Powerline adapter to its factory 
default settings.
Item
Description
Powerline 500
Nano Adapters
Ethernet cables
In some regions,
a Resource CD is
included with your
product.