Netgear WNDR4300 – N750 Wireless Dual Band Gigabit Router ユーザーズマニュアル

ページ / 131
Hardware Setup 
14
N750 Wireless Dual Band Gigabit Router WNDR4300 
Verify the Cabling
Verify that your router is cabled correctly by checking the router LEDs. Turn on the router by 
pressing the On/Off button on the back.
The Power LED lights amber when the router is turned on.
The LAN port LEDs light green for each computer cabled to the router.
The 2.4 GHz N/G-Band LED is lit, and the 5.0 GHz N-Band LED is lit. 
The Internet LED is lit. If it is not, make sure that the Ethernet cable is securely 
attached to the router Internet port and the modem, and that the modem is powered on.
Verify that the LAN 
 LEDs (1 through 4) are lit for any computers cabled to the router by 
an Ethernet cable.