Netgear WNDR4300 – N750 Wireless Dual Band Gigabit Router ユーザーズマニュアル

Adding a guest network allows visitors at your home to use the Internet without having your 

wireless security key. You can add a guest network to each wireless network: 2.4 GHz b/g/n 
and 5.0 GHz a/n. 



Select Basic > Guest Network.

Select any of the following wireless settings:

Enable this wireless network. When this check box is selected, the guest network is 
enabled, and guests can connect to your network using the SSID of this profile.

Enable SSID Broadcast. If this check box is selected, the wireless access point 
broadcasts its name (SSID) to all wireless stations. Stations with no SSID can adopt the 
correct SSID for connections to this access point.

Allow guest to access My Local Network. If this check box is selected, anyone who 

connects to your network has access throughout the local network, not just Internet 
access.

Enable Wireless Isolation. If this check box is selected, wireless computers or devices 
that join the network can use the Internet but cannot access each other or access 
Ethernet devices on the network.

Give the guest network a name.

The guest network name is case-sensitive and can be up to 32 characters. You then 
manually configure the wireless devices in your network to use the guest network name 
in addition to the main SSID. 

Select a security option from the list. The security options are described in 

32.

Click Apply to save your selections.