Netgear WG511v1 - 54 Mbps Wireless PC Card 32-bit CardBus 参照マニュアル

ページ / 63
Installation Guide for the NETGEAR 54 Mbps Wireless PC Card WG511
1-2
Introduction
 
Highest level of data encryption using128-bit Shared Key WEP data encryption method. 
Lower level of data encryption or no data encryption is available to simplify your network 
setup or to improve data transfer rate.
The following Netgear products can be configured to communicate with the WG511 Wireless PC 
Card.
WG602 54 Mbps Wireless Access Point
WGR614 Wireless Cable/DSL Router
WAB102 Dual Band Access Point 
WAB501 Dual Band PC Card
MA101 802.11b Wireless USB Adapter
ME102 802.11b Wireless Access Point
MA311 802.11b Wireless PCI Adapter
MR314 and MR814 802.11b Wireless Cable/DSL Routers
MA701 802.11b Wireless Compact Flash Card
What’s in the Box?
The product package should contain the following items:
NETGEAR 54 Mbps Wireless PC Card WG511
Installation Guide for the NETGEAR 54 Mbps Wireless PC Card WG511
NETGEAR 54 Mbps Wireless PC Card WG511 Resource CD, including:
— Driver and Configuration Utility Software
— Installation Guide for the NETGEAR 54 Mbps Wireless PC Card WG511
Warranty card
Support information card
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the 
carton, including the original packing materials, in case you need to return the product for repair.
The NETGEAR 54 Mbps Wireless PC Card WG511 has two interfaces.  The PCMCIA Type II 
connector connects to any notebook PC with an available PCMCIA or CardBus slot.  The wireless 
interface of the NETGEAR 54 Mbps Wireless PC Card WG511 remains outside of the notebook 
PC chassis when the wireless PC card is inserted into a notebook.  The green LED indicates the 
wireless link condition of the NETGEAR 54 Mbps Wireless PC Card WG511 with another 
wireless node or the associated access point.