Netgear RBS50 – Orbi AC3000 Tri-band WiFi System インストールガイド

1. Connect Your Orbi Router

If you already connected your Orbi router, skip this step.

2. Place Your Orbi Satellite

If this is the first Orbi satellite you are adding to your Orbi network, follow these

steps:

Place your Orbi satellite in the middle of your house to get the best WiFi coverage.

Connect the Orbi satellite to a power source. The Power LED on the back of the Orbi
satellite lights green. If the Power LED does not light, press the

Power On/Off button.

Modem

2. Place Your Orbi Satellite (Continued)

Quick Start Guide

If you already set up an Orbi router and satellite on your Orbi network, follow

these steps:

Place your Orbi satellite in a corner of your house that is far away from your existing
Orbi router and satellite, but still within range or your Orbi router and satellite. If your
house has multiple floors, place your Orbi satellite on a different floor than your existing
Orbi router and satellite.

Connect the Orbi satellite to a power source. The Power LED on the back of the Orbi
satellite lights green. If the Power LED does not light, press the

Power On/Off button.

Orbi router

Orbi satellite

INTERNET

Orbi router

Orbi satellite

3. Sync Your Orbi Satellite

Wait about two minutes for the Orbi satellite’s ring LED to light solid white. Then, press the
Sync button on the back of your Orbi satellite, and within two minutes, press the Sync

button on the back of your Orbi router.
The Orbi satellite’s ring LED lights white, then lights one of the following colors for about
three minutes and then turns off:

Blue
The Orbi router and satellite successfully synced, and the connection between the

router and satellite is good.
Amber
The Orbi router and satellite successfully synced, and the connection between the

router and satellite is fair. Consider moving the Orbi satellite closer to the Orbi router.
Magenta
The Orbi router and satellite failed to sync. Move the satellite closer to the router and

try again.