Netgear WNR612v3 - Wireless-N 150 2-Port Router ユーザーズマニュアル
Getting Started with NETGEAR genie
13
N150 2-Port Wireless Router WNR612v3
NETGEAR genie Setup
NETGEAR genie runs on any device with a web browser. Installation and basic setup takes
about 15
about 15
minutes to complete.
To use NETGEAR genie to set up your router:
1.
Turn the router on by pressing the On/Off button.
2.
Make sure that your computer or wireless device is connected to the router with an Ethernet
cable (wired) or wirelessly with the preset security settings listed on the bottom label.
3.
Launch your Internet browser.
•
The first time you set up the Internet connection for your router, the browser goes to
http://www.routerlogin.net and the NETGEAR genie screen displays.
•
If you already used the NETGEAR genie, type http://www.routerlogin.net in the
address field for your browser to display the NETGEAR genie screen. See
4.
Follow the onscreen instructions to complete NETGEAR genie setup. NETGEAR genie
guides you through connecting the router to the Internet.
If the browser cannot display the web page:
•
Make sure that the computer is connected to one of the four LAN Ethernet ports or
wirelessly to the router.
•
Make sure that the router has full power, and that its wireless LED is lit.
•
Close and reopen the browser to make sure that the browser does not cache the previous
page.
•
Browse to
http://www.routerlogin.net
.
•
If the computer is set to a static or fixed IP address (this is uncommon), change it to
obtain an IP address automatically from the router.
If the router does not connect to the Internet:
1.
Review your settings to be sure that you have selected the correct options and typed
everything correctly.
2.
Contact your ISP to verify that you have the correct configuration information.
3.
Read
. If problems persist, register your NETGEAR product and
contact NETGEAR technical support.