Netgear WNR612v3 - Wireless-N 150 2-Port Router ユーザーズマニュアル

Erase

You can erase the configuration and restore the factory default settings. Some examples are 
If you move the router to a different network or if you have forgotten the password.

You can use the Restore Factory Settings button on the back of the router (see 

89), or you can click the Erase button in this screen.

Erase sets the user name to admin, the password to password, and the LAN IP address to 
192.168.1.1, and enables the router’s DHCP.

Set Password

This feature lets you change the default password that is used to log in to the router with the 
user name admin. 

This is not the same as changing the password for wireless access. The label on the bottom 
of your router shows your unique wireless network name (SSID) and password for wireless 
access (see 

10).



Select Advanced > Administration > Set Password to display the following screen:

On the Set Password screen, type the old password, and type the new password twice.

Click Apply so that your changes take effect.