Netgear WGX102v2 - 54 Mbps Wall-Plugged Wireless Range Extender 参照マニュアル
Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
2-6
Introduction
202-10042-02 v1.1
The XE102 Wall-Plugged Ethernet Bridge
he front panel of the XE102 contains the status lights described below.
Figure 2-3: XE102 Front Panel
You can use the status lights to verify connections. Viewed from top to bottom, the table below
describes the lights on the front panel.
describes the lights on the front panel.
Table 2-1.
Status Light Descriptions
Label
Activity
Description
Power
On Green Solid
Blink
Off
Blink
Off
Power is supplied to the XE102.
Power on self test.
Power is not supplied to the XE102.
Power on self test.
Power is not supplied to the XE102.
HomePlug On
Off
The HomePlug port has detected a link with an attached
device.
No devices are attached on the Powerline network.
device.
No devices are attached on the Powerline network.
Ethernet
On
Blink
Off
Off
The Ethernet port has an Ethernet cable connected to a
powered on device such as a switch, router, or computer.
Data is being transmitted or received by the wireless port.
There is no active Ethernet connection.
powered on device such as a switch, router, or computer.
Data is being transmitted or received by the wireless port.
There is no active Ethernet connection.