Netgear WGX102v2 - 54 Mbps Wall-Plugged Wireless Range Extender 参照マニュアル

3-10

Installing the Wireless Range Extender

1. Turn off the modem, router, wireless range extender, and computers 

2. Turn on the modem, wait two minutes

3. Turn on the router and wait one minute

4. Plug in the wireless range extender and wait one minute

5. Turn on the computers. 

The Internet status light on the wireless range extender will be lit if the Ethernet cable from the 
XE102 to your router is plugged in securely and the modem and router are turned on. 

The Wireless Network Name (SSID) and WEP or WPA settings of the router and wireless 
computer must match exactly. 

LAN and wirelessly connected computers must be configured to obtain an IP address 
automatically via DHCP. Please see 

 or the animated 

tutorials on the CD for help with this.

If the Power light does not turn solid green within two minutes after turning the wireless range 
extender on, reset the wireless range extender according to the instructions in 

.

1. Connect to the wireless range extender by typing 

 in the address field of 

your browser, then click Enter.

2. For security reasons, the wireless range extender has its own user name and password. When 

prompted, enter admin

 for the user name and password for the password, both in lower case 

letters. To change the password, see 

Note: The wireless range extender user name and password are not the same as any user name 
or password you may use to log in to your Internet connection.