Netgear EX7300 – Nighthawk X4 WiFi Range Extender ユーザーズマニュアル
Get to Know Your Extender
6
Nighthawk X4 AC2200 WiFi Range Extender
Front Panel and Side Panel LEDs and Buttons
The LEDs are located on the front panel. A switch, buttons, and an Ethernet port are located
on the side panel.
on the side panel.
Router Link LED
Client Link LED
Power LED
WPS LED
Access Point/
Power On/Off button
WPS button
Ethernet port (on the bottom)
Factory Reset button
Router Arrow LED
Client Arrow LED
Extender switch
Figure 1. Extender front panel and side panel
Table 1. LEDs
LED
Description
Router Link
This LED indicates the connection between the extender and the router
or access point.
or access point.
•
Solid green. Best connection.
•
Solid amber. Good connection.
•
Solid red. Poor connection.
•
Off. No connection.
Client Link
This LED indicates the connection between the extender and a
computer or mobile device.
computer or mobile device.
•
Solid green. Best connection.
•
Solid amber. Good connection.
•
Solid red. Poor connection.
•
Off. No connection.
Power
•
Solid amber. The extender is booting.
•
Solid green. The extender is powered on.
•
Off. The extender is powered off.
WPS
•
Solid green. WiFi security is enabled (WPA or WPA2).
•
Blinking green. The extender is making a WPS connection.
•
Off. WiFi security is not enabled.