Netgear WN2500RP - Universal WiFi Range Extender ユーザーズマニュアル
Extender Network Settings
20
Universal Dual Band WiFi Range Extender WN2500RP
Status Screen
When you connect to http://www.mywifiext.net, after the automatic firmware check, the Status
screen displays. You can also select Status from the menu to display this screen:
screen displays. You can also select Status from the menu to display this screen:
This screen shows the current settings and the status of your extender.
You can click Show Statistics to see device performance statistics such as the number of
packets sent and number of packets received for each port. See
packets sent and number of packets received for each port. See
21.
The following fields are displayed in the Status screen:
•
Hardware Version
. The hardware version of the extender.
•
Firmware Version
. The current firmware version of the extender. If you upgrade the
firmware, this field changes.
•
GUI Language Version
. The language version running on the extender. If you upgrade
the firmware, this field changes.
Connection Status to Existing Network
•
Name (SSID)
. Your extender is set up to connect to this SSID, also called the wireless
name.
•
Connection Status
. The status of your wireless connection (connected or disconnected).
•
Link Rate
. The actual transmission (Tx) and receive (Rx) link rate in the current wireless
connection.
Extender PC Info
•
MAC Address
. The physical address of the extender, as seen from the local area
network (LAN).
•
IP Address
. The IP address of the extender. The default is 192.168.1.250.
•
DHCP Server
. Identifies the network DHCP server on the wireless network.