Netgear PR2000 - Trek N300 Travel Router and Range Extender ユーザーズマニュアル
Advanced Settings
113
Trek N300 Travel Router and Range Extender PR2000
Advanced Wireless Settings
You can turn the wireless radio on and off, specify WPS settings, and set up a wireless
access list.
access list.
The Fragmentation Length, CTS/RTS Threshold, and Preamble Mode options in this screen
are reserved for wireless testing and advanced configuration only. Do not change these
settings unless you have a specific reason to do so.
are reserved for wireless testing and advanced configuration only. Do not change these
settings unless you have a specific reason to do so.
Control the Wireless Radio
By default, the wireless radio is enabled so that you can connect wirelessly to the Trek. You
can turn the wireless radio on or off in the Advanced Wireless Settings screen. When the
wireless radio is off, you can still use an Ethernet cable for the WAN and LAN connections to
the Trek.
can turn the wireless radio on or off in the Advanced Wireless Settings screen. When the
wireless radio is off, you can still use an Ethernet cable for the WAN and LAN connections to
the Trek.
To turn the wireless radio on or off:
1.
Launch your browser from a computer or wireless device that is connected to the Trek.
2.
Enter www.routerlogin.net or www.routerlogin.com in the web browser address bar.
The login screen displays.
3.
Enter the Trek user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
4.
Click the OK button.
The BASIC Home screen displays.
5.
Select ADVANCED > Advanced Setup > Wireless Settings.
By default, the Enable Wireless Router Radio check box is selected.