Netgear PR2000 - Trek N300 Travel Router and Range Extender ユーザーズマニュアル
Advanced Settings
120
Trek N300 Travel Router and Range Extender PR2000
2.
Enter www.routerlogin.net or www.routerlogin.com in the web browser address bar.
The login screen displays.
3.
Enter the Trek user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
4.
Click the OK button.
The BASIC Home screen displays.
5.
Select ADVANCED > Advanced Setup > Dynamic DNS.
6.
Register for an account with one of the Dynamic DNS service providers whose URLs are in
the Service Provider list.
7.
Select the Use a Dynamic DNS Service check box.
8.
Select the URL of your Dynamic DNS service provider.
For example, for DynDNS.org, select www.DynDNS.org.
9.
Type the host name (or domain name) that your Dynamic DNS service provider gave you.
10.
Type the user name for your Dynamic DNS account.
Enter the name that you use to log in to your account, not your host name.
11.
Type the password (or key) for your Dynamic DNS account.
12.
Click the Apply button.
Your changes are saved.
Static Routes
Static routes provide more routing information to your Trek. Under usual circumstances, the
Trek has adequate routing information after it has been configured for Internet access, and
you do not need to configure more static routes. You must configure static routes only for
unusual cases such as multiple Treks or multiple IP subnets on your network.
Trek has adequate routing information after it has been configured for Internet access, and
you do not need to configure more static routes. You must configure static routes only for
unusual cases such as multiple Treks or multiple IP subnets on your network.
As an example of when a static route is needed, consider a situation with the following
elements:
•
Your primary Internet access is through a cable modem to an ISP.