Netgear WNDA3100v2 – N600 Wireless Dual Band USB Adapter ユーザーズマニュアル

2-19

The default advanced settings usually work fine. Except for the power saving setting, changing the 
settings incorrectly could cause your wireless connection to fail. Change them only if you have a 
specific reason to do so. To go to advanced settings, click Advanced Settings on the Settings tab.

Device

Regional 
Domain

This is the region setting for the wireless adapter. The approved 
channels for the region are automatically scanned. Governments 
regulate the channels used for wireless transmission. Operating the 
wireless adapter in a different region might violate local laws

Driver version

The wireless adapter driver version. 

Driver Date

The wireless adapter driver release date.

MAC Address

The MAC (Media Access Control) address of the adapter. This is a 
unique 48-bit hardware address assigned to every network interface 
card. Some wireless networks restrict access based on a list of known 
MAC addresses. If you are communicating with such a network, you 
must provide the address shown here to the network administrator 
before you are allowed to connect. Restricting access by MAC address 
adds an obstacle against unwanted access to your network. However, 
unless you use data encryption security, the data broadcast over the 
wireless link is fully exposed.

IP Address

The IP address assigned to this adapter.

Smart Wireless 
Utility

Version

The version of the Smart Wizard.

Date

The release date of the Smart Wizard.

Note: For Windows Vista computers, you must have administrator rights to access the 

Advance Settings screen.