KitchenAid 36" Range Hood with the FIT System 使用とお手入れ

1.  Disconnect Power

2.  Mark Hole Locations

Align the exterior edge of the mounting brackets 

with the exterior edges of the upper cabinet.
IMPORTANT: The brackets should touch the upper cabinet.
With a pencil, mark the upper holes on the brackets.

3.  Install Brackets

 

■

Using a #2 Phillips screwdriver, install the drywall anchors.

 

■

Using #8-18 x 1" (4.2 x 25 mm) flat-head #2 Phillips screws, 

install the mounting brackets using the upper holes.

NOTE: For installations to a surface other than drywall, 

it is recommended that a qualified contractor determine 

the anchoring method.

4.  Prepare Range Hood

 

■

Set the range hood on its back on a covered surface.

 

■

Using a #2 Phillips screwdriver, remove the electrical 

box cover.

 

■

Using a flat-blade screwdriver, remove the appropriate 

power supply knockout.