KitchenAid 30-Inch 4-Burner Dual Fuel Slide In Range, Architect® Series II 使用とお手入れ

For normal range use, it is not suggested to remove the oven 
door. However, if removal is necessary, make sure the oven is off 
and cool. Then, follow these instructions. The oven door is heavy.

1. Open oven door all the way.

2. Flip up the hinge latch on each side.

3. Close the oven door as far as it will shut.

4. Lift the oven door while holding both sides.

Continue to push the oven door closed and pull it away from 
the oven door frame.

1. Insert both hanger arms into the door.

2. Open the oven door.

You should hear a “click” as the door is set into place.

3. Move the hinge levers back to the locked position. Check 

that the door is free to open and close. If it is not, repeat the 
removal and installation procedures.

Remove all items from inside the warming drawer, and allow the 
warming drawer to cool completely before attempting to remove 
the drawer.

1. Open drawer to its full open position.

2. Locate the blackloops on both sides of the drawer.

3. Pull both loops foward at the same time, then pull drawer out 

another inch.

4. Holding the drawer by its sides, not its front, gently pull it all 

the way out.

1. Align the drawer glides with the receiving guides.

2. Push drawer in all the way.

3. Gently open and close the drawer to ensure it is seated 

properly on the slides.

A