KitchenAid 30-Inch 4-Burner Dual Fuel Slide In Range, Architect® Series II インストールガイド

1. Check that all parts are now installed. If there is an extra part, 

go back through the steps to see which step was skipped.

2. Check that you have all of your tools.

3. Dispose of/recycle all packaging materials.

4. Check that range level. See the “Level Range” section.

5. Use a mild solution of liquid household cleaner and warm 

water to remove waxy residue caused by shipping material. 
Dry thoroughly with a soft cloth. For more information, see 
the “Range Care” section of the Use and Care Guide.

6. Read the “Range Use” section in the Use and Care Guide.

7. Plug power cord into appropriate outlet. Slide range into its 

final location. Check that the flexible conduit or power supply 
cord are not bent.

8. Turn on surface burners and oven. See the Use and Care 

Guide for specific instruction on range operation. 

■

Household fuse is intact and tight, or circuit breaker has not 
tripped.

■

Range is plugged into an outlet.

■

Electrical supply is connected.

■

See the “Troubleshooting” section in the Use and Care Guide.

9. When the range has been on for 5 minutes, check for heat. If 

the range is cold, turn off the range and check that the gas 
supply line shutoff valve is open.

■

If the gas supply line shutoff valve is closed, open it, then 
repeat the 5-minute test as outlined above.

■

If the gas supply line shutoff valve is open, close it, and 
contact a qualified technician.

Please reference the “Assistance or Service” section of the 
Use and Care Guide or contact the dealer from whom you 
purchased your range.

Gas conversions from Natural gas to LP gas; or from LP gas to 
Natural gas must be done by a qualified installer.

1. Turn manual shutoff valve to the “closed” position.

A

B

C