KitchenAid 1.4 cu. ft. Microwave 3.6 cu. ft. True Convection Lower Oven Architect® Series インストールガイド
Page 1
4 screws
Phillips screwdriver
Product dimensions
Cutout dimensions
Before you start...
41"
recessed
height
42-7/16"
overall
height
25-3/8
recessed
width
23" max.
recessed
depth
recessed
depth
27” oven
41"
recessed
height
42-7/16"
overall
height
28-3/8"
recessed
width
23" max.
recessed
depth
recessed
depth
30” oven
30" min.
cabinet
1" top
of cutout
to bottom
of upper
cabinet door
of cutout
to bottom
of upper
cabinet door
27" min.
cabinet width
28-1/2"
cutout
width
25-1/2"
cutout
width
41-1/4"
cutout
height
height
19-1/4"
bottom
bottom
of cutout
to floor
1-1/2" min.
bottom of
cutout to
top of
cabinet
door
1" top of cutout
to bottom of
upper cabinet
door
to bottom of
upper cabinet
door
1-1/2"
min.
bottom of
cutout to
top of
cabinet
door
19-1/4"
bottom of
cutout to
floor
30" oven
Cabinet side view
27" oven
41-1/4"
cutout
height
height
23-1/4" min.
cutout depth
23" recessed
oven depth
recessed
oven
cabinet
oven
front
front
Important: Observe all governing codes
and ordinances.
and ordinances.
Proper installation is your responsibility.
Have a qualified technician install this oven.
Have a qualified technician install this oven.
Oven location should be away from strong draft
areas, such as windows, doors and strong
heating vents.
areas, such as windows, doors and strong
heating vents.
Cabinet opening dimensions that are shown
must be used. Given dimensions provide
minimum clearance.
must be used. Given dimensions provide
minimum clearance.
Recessed installation area must provide
complete enclosure around the recessed portion
of the oven.
complete enclosure around the recessed portion
of the oven.
Electrical ground is required. See “Electrical
requirements.”
requirements.”
Electrical supply junction box should be located
3 inches maximum below the support surface
when oven is installed in a wall cabinet. Cutout
for wiring should be in the right rear or left rear
corner. For undercounter installation, it is
recommended that the junction box be located
in the adjacent right or left cabinet. If installing
junction box on rear wall behind oven, junction
box must be recessed and located in the upper
or lower right or left corner of cabinet.
3 inches maximum below the support surface
when oven is installed in a wall cabinet. Cutout
for wiring should be in the right rear or left rear
corner. For undercounter installation, it is
recommended that the junction box be located
in the adjacent right or left cabinet. If installing
junction box on rear wall behind oven, junction
box must be recessed and located in the upper
or lower right or left corner of cabinet.
Oven support surface MUST be solid, level and
flush with bottom of cabinet cutout.
flush with bottom of cabinet cutout.
Excessive Microwave Energy Exposure
Do Not attempt to operate the microwave
oven with the door open.
Do Not tamper with or defeat the safety
interlocks.
Do Not place objects between the microwave
oven front face and door.
Do Not allow soil or cleaner residue to
accumulate on sealing surface of the
microwave oven door.
Do Not operate the microwave oven if
damaged.
Do Not operate the microwave oven if:
oven with the door open.
Do Not tamper with or defeat the safety
interlocks.
Do Not place objects between the microwave
oven front face and door.
Do Not allow soil or cleaner residue to
accumulate on sealing surface of the
microwave oven door.
Do Not operate the microwave oven if
damaged.
Do Not operate the microwave oven if:
— door is bent.
— hinges and latches are broken or loose.
— door seals, sealing surfaces or glass are
— hinges and latches are broken or loose.
— door seals, sealing surfaces or glass are
broken.
The microwave oven door must close
properly to provide safe operation.
Have a qualified repair person adjust, repair
and check microwave oven for microwave
leakage after a repair is made.
Do Not use microwave for commercial
purposes. The microwave oven in this unit is
designed for household use only.
Failure to follow these instructions could
result in exposure to excessive microwave
energy.
properly to provide safe operation.
Have a qualified repair person adjust, repair
and check microwave oven for microwave
leakage after a repair is made.
Do Not use microwave for commercial
purposes. The microwave oven in this unit is
designed for household use only.
Failure to follow these instructions could
result in exposure to excessive microwave
energy.
Copies of the standards listed may be obtained from:
* National Fire Protection Association
Batterymarch Park
Quincy, Massachusetts 02269
Quincy, Massachusetts 02269
Tool needed:
Parts supplied:
Cabinet filler kits are available from your dealer.
Use a matching color kit if oven is smaller than your
cabinet opening.
Use a matching color kit if oven is smaller than your
cabinet opening.
27" oven filler height is 7-13/16"
Black
— 4378950
White —
4378951
Almond — 4378952
30" oven filler height is 4-13/16"
Black —
4378944
White —
4378945
Almond — 4378946
26-3/4"
overall width
29-3/4"
overall width
It is the customer’s responsibility:
To contact a qualified electrical installer.
To assure that the electrical installation is
adequate and in conformance with National
Electrical Code, ANSI/NFPA 70 — latest edition*,
and all local codes and ordinances.
To contact a qualified electrical installer.
To assure that the electrical installation is
adequate and in conformance with National
Electrical Code, ANSI/NFPA 70 — latest edition*,
and all local codes and ordinances.
Your safety and the safety of others are
very important.
We have provided many important safety
messages in this manual and on your appliance.
Always read and obey all safety messages.
messages in this manual and on your appliance.
Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards
that can kill or hurt you and others.
This symbol alerts you to potential hazards
that can kill or hurt you and others.
All safety messages will follow the safety alert
symbol and either the word “DANGER” or
“WARNING”. These words mean:
symbol and either the word “DANGER” or
“WARNING”. These words mean:
All safety messages will tell you what the potential
hazard is, tell you how to reduce the chance of
injury, and tell you what can happen if the
instructions are not followed.
hazard is, tell you how to reduce the chance of
injury, and tell you what can happen if the
instructions are not followed.
You can be killed or seriously injured if you
don’t immediately follow instructions.
don’t immediately follow instructions.
You can be killed or seriously injured if you
don’t follow instructions.
don’t follow instructions.
WARNING
DANGER
WARNING