KitchenAid 30-Inch 5 Burner Gas Convection Range with Warming Drawer インストールガイド

3. Use a ¹⁵⁄₁₆" combination wrench and an adjustable wrench to 

attach the flexible connector to the adapters.
IMPORTANT: All connections must be wrench-tightened. Do 
not make connections to the gas regulator too tight. Making 
the connections too tight may crack the regulator and cause 
a gas leak. Do not allow the regulator to turn when tightening 
fittings. 

1. Check that the gas pressure regulator shutoff valve is in the 

“on” position.

2. Open the manual shutoff valve in the gas supply line. The 

valve is open when the handle is parallel to the gas pipe.

3. Test all connections by brushing on an approved 

noncorrosive leak-detection solution. If bubbles appear, a 
leak is indicated. Correct any leak found.

4. Remove cooktop burner caps and grates from parts 

package. Burner caps should be level when properly 
positioned. If burner caps are not properly positioned, 
surface burners will not light. Place burner grates over 
burners and caps.

5. Plug into a grounded 3 prong outlet.
6. Slide range into final location, making sure the rear leveling 

leg slides into the slot of the anti-tip bracket.

A

B C

D

E

F

G

H

A

A

B 

C

A

B