Xerox 2101 ST Digital Copier/Printer リリースノート

From DocBuilder Pro Imposition and Booklet Maker, an imposed document with a center 
staple folds in the wrong direction. To fold and staple the job correctly, set the following 
options in the order specified:

Do not select reverse page order when you have selected Booklet Maker>Standard Booklet 
and center staple.

Staple and punch are not supported on Index2, Heavyweight2, labels, and transparencies.

It is possible to select duplex top-bottom with dual staple; however, doing so might produce 
undesired results.

Some paper sizes are missing from the Mac OS X driver: A4 P is displayed as A4 A4, 
8.5

x

14 is missing (use Legal instead), JB4 should be B4, JB5 should be B5 P, where P 

stands for the long edge of the paper.

The document default page size on Mac OS X does not change from letter to A4 when you 
change regional settings. To work around this, set the page size in the Print Center 
Preferences window. To do this, open the Print Center, select Print Center>Preferences 
from the menu bar, and select the desired default page size to be used for all documents.

In Mac OS X, you are allowed to choose illegal combinations, which may produce 
unpredictable results. Later releases of Mac OS X may fix this problem.

Do not print a duplex job with the Negative option and tri-folding. This may cause the 
paper to jam.

When you are setting up a job for Tri-C or Tri-Z fold (8.5

x

11 or A4) or Z-fold (A3 and 

11

x

17), select the SEF orientation in the Fiery Driver page size menu. Selecting LEF results 

in a conflict.

The default page size for Mac OS 9 is letter instead of A4.

A6 paper is not supported for the Fiery EX2101 Printer Controller.