Xerox 2101 ST Digital Copier/Printer リリースノート

 

Pressing the IOT Interrupt button suspends a print job in progress (after the copier has 
finished printing its current set of pages) and allows you to use the copier to make copies 
manually. After a period of time, the print job resumes. You can program the time period at 
the copier. The default time period is 15 seconds. 

There is no indication on the Fiery EX2101 Printer Controller that the print job has been 
interrupted. The status of the job remains Printing.

 

You are allowed to specify finishing options, such as stapling, for the copy job, even 

if the print job you interrupt also has finishing options.

Use the IOT Interrupt button with caution. If you encounter an error while you are 
copying (such as a paper jam or an out-of-paper condition), the print job cannot be 
resumed and you must resubmit it. When you resubmit the job, reduce the number of sets 
desired by the number already printed.

 

If you interrupt a job that has finishing options, such as stapling or folding, and an 

error (such as a paper jam or an out-of-paper condition) occurs on the copier before it 
finishes printing its current set of pages, the interrupt light stays on and the copier stops 
responding. You must restart the copier. When you resubmit the job, reduce the number of 
sets desired by the number already printed.

 

Safe Erase renders files deleted from the Fiery EX2101 Printer Controller permanently 
inaccessible. Normally, files that have been deleted from the Fiery EX2101 Printer 
Controller can still be recovered. If you enable the Safe Erase option, deleted files are 
overwritten to prevent file recovery. 

 

The Functions menu appears.

 

If you print a Configuration page, Safe Erase is shown as enabled.

For information about accessing Fiery EX2101 Printer Controller Setup from the Control 
Panel, see the 

 

.