Xerox 2101 ST Digital Copier/Printer インストールガイド

After you perform initial Setup (Server, Network, and Printer Setup) from the Control 
Panel, you can change most Setup options from a Windows computer. 

In addition to using the Control Panel, you can set up the Fiery EX2101 in two ways: 
locally and remotely. Local Setup is for systems with the FACI. Local Setup uses a 
Windows XP application, Fiery Server Setup. Remote Setup is performed from a 
Windows computer using Fiery WebSetup or Command WorkStation. 

In this chapter, illustrations for both Setup interfaces, where applicable, appear 

side by side: local Setup on the left, remote Setup on the right. Descriptions for the 
Setup options are listed in the order in which they appear on the local Setup window. 
Some Setup options cannot be accessed from remote Setup. Use local Setup or the 
Fiery EX2101 Control Panel instead.

The FACI is available as an option.

Regardless of how you access Setup, you must log in as Administrator, both at the 
Fiery EX2101 and within the Setup application you use. After the Fiery EX2101 
restarts, log in to the Windows XP Logon window with Administrator as the login 
name and enter the password, if required. 

The default Windows XP password is “Fiery.1”. You are always prompted to 

enter this password unless you have set a new password.

To use the Setup applications (Fiery WebSetup, Command WorkStation or Fiery 
Server Setup), you must enter the Fiery EX2101 Administrator password. This is set 
either from the local Setup at the Fiery Server Setup, or remote Setup from Fiery 
WebSetup or Command WorkStation.