Xerox 2101 ST Digital Copier/Printer インストールガイド
7
7-16
Administering the Fiery EX2101
Rebooting the Fiery EX2101
Use the following procedure to reboot the Fiery EX2101. Reboot System shuts down
and restarts the Fiery EX2101 system software and operating system.
and restarts the Fiery EX2101 system software and operating system.
T
O
REBOOT
THE
F
IERY
EX2101
1.
Make sure the Fiery EX2101 is not receiving, processing, or printing a job.
Make sure the status message on the Control Panel reads Idle.
2.
Press the Menu button to display the Functions menu.
3.
Use the down arrow button to scroll to the last screen, and choose Shut Down.
4.
Use the line selection button to choose Reboot System.
To access the FACI, if installed, you must enter the user name and the password at the
FACI. The user name is
FACI. The user name is
Administrator
, and the default password is “
Fiery.1
”.
Shutting down the Fiery EX2101
You may have to shut down the Fiery EX2101 for service. When you do so, fonts
downloaded to the hard disk are not deleted. Print jobs in the Hold and Printed
queues and jobs that have been processed but not printed are not deleted and are
available for printing when you restart the Fiery EX2101.
downloaded to the hard disk are not deleted. Print jobs in the Hold and Printed
queues and jobs that have been processed but not printed are not deleted and are
available for printing when you restart the Fiery EX2101.