Xerox 2101 ST Digital Copier/Printer インストールガイド

To prepare for printing at your site, you must do some initial Fiery EX2101 
configuration, or Setup, to specify the network environment and the kind of printing 
you do. Before you perform Setup, you must decide the levels of access you will 
implement for your site. Administrators and operators must also understand how 
Fiery EX2101 system software is structured in order to configure and use the 
Fiery EX2101 system correctly.

When you configure the Fiery EX2101 during Setup, you (as system administrator) 
implement a particular level of control by enabling or not enabling print connections, 
passwords, and access to Fiery WebTools. The level of control you implement can 
range from minimum to moderate to maximum—or none at all. 

• Minimum control might be appropriate for a small site where anyone on the local 

network can control all printing and Fiery EX2101 functions. Although there may 
be an administrator or operator charged with certain duties, all users have equal 
access to the system and job management tools.

• Maximum control might be appropriate for a high-volume printing environment 

where an administrator or operator controls the job flow and all printing; jobs sent 
by users are spooled (stored) to the Fiery EX2101 disk until the operator decides it is 
time to print them. In addition, only the administrator and operator have access to 
job management tools. We recommend this level of control.

The Fiery EX2101 supports three print connections: Hold queue, Print queue, and 
Direct connection. These print connections can be enabled, or “published,” to users 
on the network when you configure Printer Setup. All published connections are 
constantly checked for the presence of jobs. The Print queue and Direct connection 
give remote users more direct access to the Fiery EX2101 than the Hold queue. 
Therefore, do not publish the Print queue and the Direct connection in environments 
where maximum control is desired.