Xerox 2101 ST Digital Copier/Printer プリント

This appendix describes error messages you might see, and provides some 
troubleshooting guidelines should a problem arise with the Fiery EX2101, Command 
WorkStation LE, or Command WorkStation. If you are unable to resolve a problem 
after referring to this chapter, contact your authorized service/support center.

Error messages can result from problems with the job, the Fiery EX2101, Command 
WorkStation, Command WorkStation LE, Fiery WebSpooler, Fiery Spooler, or the 
copier. When an error interferes with printing, you see a message in the Activity 
Monitor of Command WorkStation or Command WorkStation LE. The status bar 
that displays the message indicates the process in which the error occurred.

An error message for the Fiery EX2101 sometimes remains displayed on Command 
WorkStation or Command WorkStation LE even after you resolve the error. There 
might be a brief delay while the Fiery EX2101 communicates the resolution of the 
error to the application. After a short delay, printing resumes and the Command 
WorkStation or Command WorkStation LE window is updated.

If you encounter a Fiery EX2101 message alerting you to check the power and cable, 
there may be a problem with the copier power or cable connection. Check to make 
sure the copier is turned on. Make sure the cable connection between the 
Fiery EX2101 and the copier has not come loose. When the cable is securely connected 
to both the Fiery EX2101 and the copier, the Fiery EX2101 resumes printing.

For information on resolving copier-related errors, refer to your copier documentation. 
You can cancel the pending print job while you attend to a given error condition.