Xerox Document Workstation with PlotWorks Support & Software ユーザーガイド

G-20 • PlotWorks User Guide

Repro Desk software versions 4.25, and 4.30 are currently supported.

Unsupported media type (Bond 110g, *Bond, or *Bond 110g) is translated to
Bond

The media type selected in Repro Desk is not currently supported and Bond

will be used instead.

Unsupported media type (Trans. 110g) being translated to T-Bond

The media type selected in Repro Desk is not currently supported and T-

Bond will be used instead.

Unsupported media type (Film 4.5mil) being translated to Mylar

The media type selected in Repro Desk is not currently supported and Mylar

will be used instead.

Unsupported pen set file version

The pen set file version is not version 100. This is currently the only

supported pen file version.

User-defined patterns require manual importing of the pattern file before
printing the job

User-defined patterns (numbers 128-255) are used in the pen set. These

patterns need to be imported into the Printer Interface via the pattern set file

before printing.

Zip files are not currently supported. Please unzip the files and add them
manually

Unzip the zip file and then add it to either the Repro Desk or PlotWorks job

ticket.

Zip was truncated to 25 characters

The Delivery Zip field is limited to 25 characters

Zoom percentage was too large and has been truncated to 10,000%

If a zoom percentage greater than 10000% is selected, PlotWorks reduces it

to 10000%.

Print Parameter Issues

AutoCAD DWG files

The Repro Desk AutoCAD default font, font path and Xref settings are

ignored and PlotWorks settings are used instead.