Xerox 4213 MICR MRP ユーザーガイド
APPLICATIONS
Fonts—4045 Model 20 compatibility
The fonts are stored on the host system as EBCDIC sixel-
encoded fonts. The fonts have been encoded at the host using a
special translate table, and are decoded at the printer using a
complementary font/graphic translate table. The special translate
table is shown in Appendix A.
encoded fonts. The fonts have been encoded at the host using a
special translate table, and are decoded at the printer using a
complementary font/graphic translate table. The special translate
table is shown in Appendix A.
This method is recommended for downloading fonts through the
XCTO interface.
XCTO interface.
The XES command sequence required to download the font is:
=UDK=**+F<LE>
<encoded font data>*+P<LE>
<encoded font data>*+P<LE>
=UDK=
The XES command which defines the XES escape
character
character
*
The user-defined XES escape character
+F
The XES font load command
<LE>
The Carriage Return/Line Feed (CR/LF) required to
terminate this XES command
terminate this XES command
<encoded
font data>
The sixel-encoded font data
*
The user-defined XES escape character
+P
The XES print command used as a job delimiter
<LE>
The Carriage Return/Line Feed (
L
) required to
terminate this XES command
For full details of XES commands, refer to the Xerox 4213 Laser
Printer User Guide.
Printer User Guide.
In this mode the font/graphic translate table is invoked
automatically after the next line end following a load font (*+F)
or add font (*+A) command.
automatically after the next line end following a load font (*+F)
or add font (*+A) command.
4–2
XEROX COAX/TWINAX OPTION (XCTO) PROGRAMMER REFERENCE