Xerox 4213 MICR MRP ユーザーガイド
7.
Configuration and sysgen
samples
This chapter provides you with examples of possible
configurations for your Xerox printing system to function on the
IBM host.
configurations for your Xerox printing system to function on the
IBM host.
The chapter is divided into two parts: the first looks at the coax
environment, the second at the twinax environment.
environment, the second at the twinax environment.
Coax printers
Four of the possible line configurations are shown in this section.
They are followed by sample sysgen programmes.
They are followed by sample sysgen programmes.
Line configurations
XCTO supports two types of coax environments, SCS in
SNA/SDLC and DSC in non-SNA. The next four illustrations show
possible configurations for both environments using IBM
3174/3274/3276 attachments.
SNA/SDLC and DSC in non-SNA. The next four illustrations show
possible configurations for both environments using IBM
3174/3274/3276 attachments.
•
Configuration 1 shows only an IBM 3287.
•
Configuration 2 shows the Xerox printer replacing the IBM
3287 on the same port.
3287 on the same port.
•
Configuration 3 shows a Xerox printer attached to a
previously unused port and the IBM 3287 attached to its
previous port.
previously unused port and the IBM 3287 attached to its
previous port.
•
Configuration 4 shows a Xerox printer attached to a
previously unused port, a second Xerox printer attached to a
previously unused port through a communications module,
and the IBM 3287 attached to its previous port.
previously unused port, a second Xerox printer attached to a
previously unused port through a communications module,
and the IBM 3287 attached to its previous port.
XEROX COAX/TWINAX OPTION (XCTO) PROGRAMMER REFERENCE
7–1