Xerox 4213 MICR MRP ユーザーガイド
PRINTING WITH THE 4213
2.
Align a single envelope, towards the arrow and against the
feed guide at the left edge of the bypass tray.
feed guide at the left edge of the bypass tray.
Envelopes are fed address side up.
•
If the envelope flap is on the long edge of the envelope,
place the closed fold against the left feed guide.
place the closed fold against the left feed guide.
•
If the envelope flap is on the short edge of the envelope,
place the closed fold against the feed rolls, to be fed in first.
place the closed fold against the feed rolls, to be fed in first.
Refer to figure 4-5 for a diagram showing envelope alignment.
Figure 4-5.
Envelope orientation diagram
Envelope flap on long edge, against the bypass feed guide
Note: Flaps should be
closed and on the bottom.
closed and on the bottom.
Printing is placed on this
side.
side.
Envelope flap on short edge, toward the feed rolls
XEROX 4213 LASER PRINTER USER GUIDE
4-31