Xerox XCounter Page Accounting Support & Software ユーザーガイド

XCOUNTER FOR NOVELL USER REFERENCE MANUAL 

 

23 

Once XCounter software has been installed and configured for Standard Page 
Accounting, the client charge back accounting method may be implemented if 
required. To install this type of accounting, there must be a client code database 
installed. To install this client database, please refer to the section “Maintaining the 
XPopup database”. Once this client database has been established, the following 
procedure may be used to install and configure the server for the XPopup client: 

• 

Launch XControl from the Start/Programs/XCounter for NetWare menu. 

From the graphic interface select Server on which XCounter is installed on and press 
the “

” button on the tool bar. 

• 

An XCounter configuration dialog box will appear. Select the “Popup” tab and 
the Popup configuration window will appear. 

 

• 

Select the “Window type” and make any other required modifications or option 
changes then “Apply” the changes. Please refer to the section “Server popup 
configuration” for more detailed information. 

The printer configuration specifies whether or not the XPopup client is enabled. 
This means that only printers that require the XPopup client need to be configured. 
Repeat the following procedure if additional printers require XPopup client 
support: