Xerox WorkCentre 3335/3345 管理者ガイド

ページ / 131
Scanning 
 
 
Xerox
®
 WorkCentre
®
 3335/3345 Multifunction Printer 
85 
 
System Administrator Guide 
 
Setting Up Scanning to an SMB Folder 
Before you begin: 
  Ensure that SMB services are running on the server or computer where you want to store scanned 
image files. Note the IP address or host name. 
  On the SMB server, create a shared folder for the printer to place your scans. Note the directory 
path, Share Name of the folder, and the Computer Name or Server Name. 
  Create a user account and password with read and write access for the printer to use to access the 
shared folder. Note the user name and password. 
  Test the connection by logging in to the shared folder from a computer with the user name and 
password. Create a folder in the directory, then delete it. If you cannot do this test, check the user 
account access rights. 
To set up scanning to an SMB folder: 
1.
  At your computer, open a Web browser, in the address field, type the IP address of the printer, then 
press 
Enter or Return
Note: 
If you do not know the IP address of your printer, see Finding the IP Address of Your Printer. 
2.
  In Xerox
®
 CentreWare
®
 Internet Services, click 
Address Book
3.
  To add a contact to the address book manually, click Add or Manually Add a Contact
Note: 
If either the Add or Manually Add a Contact button is unavailable, the address book has 
reached its limit. 
4.
  Type the contact information. 
5.
  To associate a scan destination with the contact, For Scan To Destination, click the Plus button. 
6.
  For Nickname, type a name. This field is required. 
7.
  From the Protocol menu, select SMB
8.
  Select the address type. Options are IPv4IPv6, or Host Name
9.
  Type the IP address or DNS name for the server. 
a.
  For IPv4 or IPv6, type the IP address for the server where the shared folder is located. 
b.
  For Host Name, type the network name of the computer where the shared folder is located. 
In the field under host name, type the port number. The default port number is 139. 
10.
  For Share Name, type the name of the shared folder on the remote computer. For example, to save 
scanned files to a shared folder named scans
type 
scans. This field is required. 
11.
  For Document Path, type the path of the shared folder as needed. For example, to save scans to 
a folder called colorscans that is one level below the scans folder, type /colorscans. If there is no 
subdirectory, leave this field blank. 
12.
  For Login Name, type the user name that you use to access this folder on the computer. The printer 
uses this login name to access the shared folder. This field is required. 
13.
  To access the shared folder on the remote computer to save scanned files, for Password, type and 
confirm the password. 
14.
  Click Save