Xerox WorkCentre 3335/3345 ユーザーガイド
Solutions
Probable Causes
Determine if a print spooler or a computer
sharing the printer is buffering all print jobs and
then spooling them to the printer. Spooling can
slow print speeds. To test the speed of the
printer, print some information pages such as
the Office Demo Page. If the page prints at the
rated speed of the printer, you could have a
network or printer installation issue. For help,
contact the system administrator.
sharing the printer is buffering all print jobs and
then spooling them to the printer. Spooling can
slow print speeds. To test the speed of the
printer, print some information pages such as
the Office Demo Page. If the page prints at the
rated speed of the printer, you could have a
network or printer installation issue. For help,
contact the system administrator.
The way the printer was installed on the net-
work could be an issue.
work could be an issue.
Wait. No action is needed.
The job is complex.
Change the print-quality mode in the print
driver to Standard.
driver to Standard.
The print-quality mode in the driver is set to
Enhanced.
Enhanced.
Printer Fails to Print
Solutions
Probable Causes
• To clear the error, turn off the printer, then
turn it on again.
• If the error persists, contact your Xerox rep-
resentative.
The printer has an error.
Load paper into the tray.
The printer is out of paper.
Replace the empty toner cartridge.
A toner cartridge is empty.
Turn off the printer, confirm that the power
cord is plugged in correctly to the printer and
the outlet, then switch on the printer. For de-
tails, refer to
cord is plugged in correctly to the printer and
the outlet, then switch on the printer. For de-
tails, refer to
. If
the error persists, contact your Xerox represent-
ative.
ative.
The power cord is not correctly plugged into
the outlet.
the outlet.
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
10-4
User Guide
Troubleshooting