Xerox WorkCentre 3335/3345 ユーザーガイド
Note
Ensure that the duplex unit is fully pushed in.
Troubleshooting Paper Jams
Multiple Sheets Pulled Together
Solutions
Probable Causes
Remove some of the paper. Do not load paper
past the fill line.
past the fill line.
The paper tray is too full.
Remove the paper, align the edges, then reload
it.
it.
The edges of the paper are not even.
Remove the paper from the tray, then replace
it with new dry paper.
it with new dry paper.
The paper is moist from humidity.
Try a new ream of paper.
Do not fan transparencies before loading them
in tray.
Do not fan transparencies before loading them
in tray.
Too much static electricity is present.
Use only Xerox-approved paper. For details,
refer to
refer to
Using unsupported paper.
Feed paper one sheet at a time.
Humidity is too high for coated paper.
Paper Misfeeds
Solutions
Probable Causes
• Remove the misfed paper and reposition it
properly in the tray.
• Adjust the paper guides in the tray to match
the size of the paper.
The paper is not correctly positioned in the tray.
10-27
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
User Guide
Troubleshooting