Xerox WorkCentre 3335/3345 ユーザーガイド
Note
After the printer has been on for two minutes, print the Configuration Report.
• The TCP/IP address appears in the Network Setup section of the page.
• If the IP address that appears on the page is a system default address, such
• If the IP address that appears on the page is a system default address, such
as 169.254.xxx.xxx, the printer did not acquire an IP address from the DHCP
server.
server.
• Wait two minutes, then print the Configuration Report again.
• After two minutes, if the IP address does not appear, contact the system
• After two minutes, if the IP address does not appear, contact the system
administrator.
d) To close the window, touch X to close.
Automatic Data Collection
The printer automatically collects data and transmits it to a secure off-site location.
Xerox or a designated service provider uses this data to support and service the printer,
or for billing, supplies replenishment, or product improvement. Automatically transmitted
data can include product registration, meter readings, supplies levels, printer configuration
and settings, software version, and problem or fault-code data. Xerox cannot read, view,
or download the content of your documents that reside on or pass through your printer
or any of your information management systems.
Xerox or a designated service provider uses this data to support and service the printer,
or for billing, supplies replenishment, or product improvement. Automatically transmitted
data can include product registration, meter readings, supplies levels, printer configuration
and settings, software version, and problem or fault-code data. Xerox cannot read, view,
or download the content of your documents that reside on or pass through your printer
or any of your information management systems.
To turn off automatic data collection:
1. At your computer, open a Web browser.
2. In the address field, type the IP address of the printer.
3. Press Enter or Return.
4. On the Xerox
1. At your computer, open a Web browser.
2. In the address field, type the IP address of the printer.
3. Press Enter or Return.
4. On the Xerox
®
CentreWare
®
Internet Services Welcome page, select the link in the
note regarding automated services.
Selecting this link opens the SMart eSolutions Setup page in Xerox
Selecting this link opens the SMart eSolutions Setup page in Xerox
®
CentreWare
®
Internet Services. From this page, you can disable SMart eSolutions by selecting Not
Enrolled > Apply.
Enrolled > Apply.
Note
Administrator credentials are required to disable SMart eSolutions. If you do not have
administrator credentials, contact the administrator for the printer.
administrator credentials, contact the administrator for the printer.
Maintenance Assistant
Your printer includes a built-in diagnostic capability allowing you to send diagnostic
information directly to Xerox. Maintenance Assistant is a remote diagnostic tool that
offers a fast way to resolve potential issues, receive assistance, and automate the
troubleshooting or repair process.
information directly to Xerox. Maintenance Assistant is a remote diagnostic tool that
offers a fast way to resolve potential issues, receive assistance, and automate the
troubleshooting or repair process.
Enabling Maintenance Assistant
Before you begin: If your network uses a proxy server, configure the Proxy Server settings
of the printer to ensure that the printer can connect to the Internet.
1. From the Printer Status window, click Help > Xerox
of the printer to ensure that the printer can connect to the Internet.
1. From the Printer Status window, click Help > Xerox
®
CentreWare
®
Internet Services.
2. From Xerox
®
CentreWare
®
Internet Services, click Status > SMart eSolutions.
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
2-8
User Guide
Features