Xerox Phaser 6200 インストールガイド
Windows 95/98/Me Network
Phaser® 6200 Color Laser Printer
16
3.
From a workstation desktop, use the right-mouse button and select Network Neighborhood. With
the left-mouse button, select Properties from the cascade menu.
the left-mouse button, select Properties from the cascade menu.
4.
The Network dialog should appear. Select the Configuration tab.
5.
Check the list of installed network components for the following items:
Client for Microsoft networks
Xerox TCP/IP Port Monitor
6.
If you have elected to run CentreWare DP, make sure of the following:
Novell Networks: You are required to load Novell IntraNetWare Client or Microsoft Client
for IPX networks.
for IPX networks.
TCP/IP Networks: No additional software is required, but your printer must have a valid
TCP/IP address assigned.
TCP/IP address assigned.
7.
If any of the above protocols or services are not installed, install any components necessary and
restart the system.
restart the system.
8.
Once rebooted, select the Start button and Settings, then select the Printers folder. The Printers
window should appear.
window should appear.
9.
Verify that you have selected the correct driver for your printer.
10.
Right-mouse-click on the printer icon and select Properties.
11.
Select the Details tab.
12.
Verify the driver name in the Print using the following driver list. If necessary, re-select or
install a new driver.
install a new driver.
13.
Verify the Port name in the Print to the following port list. If necessary, re-select the correct
name.
name.
14.