Xerox Phaser 6200 プリント

PHASER

®

 6200 COLOR PRINTER

Color calibration procedures adjust the printer for optimal color output.  Color settings may need adjustment upon initial 

printer set-up or when toners and imaging units are replaced.  There are two procedures:  

Lighten/Darken Colors

 and 

Balance Colors

.  If the overall image appears either too light or dark, use the 

Lighten/Darken Colors

 procedure.  If a finer 

adjustment of the primary colors (cyan, magenta and yellow) are needed, continue with the 

Balance Colors

 procedure.

The Lighten/Darken Colors procedure uniformly increases or decreases each primary color (cyan, magenta, yellow and 

black)  to produce a lighter or darker image.
Procedure:

  Select 

Lighten/Darken Colors

 from the 

Calibrate Colors Menu 

and press OK.  Use the printed 

Color Reference Page

     

to evaluate the lightness/darkness of the image.  The printer's current Lighten/Darken Value is listed on the page.

  Use the Up Arrow and Down Arrow keys to change the value from -5 (lightest) to 5 (darkest) and press OK.

  The 

Color Reference Page

 automatically prints using the new lighten/darken value. Repeat this procedure until you

     achieve the desired result.

  To finish the procedure select one of the following:

Accept Changes and Continue

: Saves the new value and returns to the 

Calibrate Colors Menu

.

Accept Changes and Exit

: Saves the new value and returns to the 

Main Menu

.

Discard Changes and Exit

: Returns to the 

Main Menu

 without saving

The Balance Colors procedure sets the balance between the primary colors (cyan, magenta and yellow) to simulate black.

Each of the color balance pages (like the page illustrated on the right) contains a 

large cluster of circles, numbered from 0 to 54, that vary in hue.

The center circle (0) should match or appear to blend with some portion of its 

surrounding hexagonal gray ring.  The circle can show a color shift if one or more 

of the colors are printing with a different density.  For example, if cyan is printing 

lighter than normal, the circle will appear redder.  

  Select 

Balance Colors

 from the 

Calibrate Colors Menu

;  The 

Light Color Balance

 page prints automatically.

  Follow the steps on the 

Light Color Balance

 page until the desired adjustment is achieved.

  Follow the steps on the 

Dark Color Balance 

page until the desired adjustment is achieved.