Xerox Phaser 3610 ユーザーガイド
Paper and Media
66
Xerox
®
Phaser
®
3610 Black and White Printer
User Guide
Loading Labels in the Bypass Tray
1. Remove all paper from the tray.
2. Load labels in the bypass tray, face up, with the top edge of the page feeding into the printer only.
3. Adjust the width guides until they touch the edges of the paper.
4. At the printer control panel, press the
2. Load labels in the bypass tray, face up, with the top edge of the page feeding into the printer only.
3. Adjust the width guides until they touch the edges of the paper.
4. At the printer control panel, press the
Menu button.
Note:
To navigate through the menu, use the
Up or Down arrow buttons.
5. Navigate to
Tray Settings, then press OK.
6. Navigate to
Bypass Tray, then press OK.
7. Navigate to
Tray Mode, then press OK.
8. Navigate to
Panel Specified, then press OK.
9. To return to the previous menu, press the
Left arrow button.
10. Navigate to
Paper Type, then press OK.
11. Navigate to
Labels, then press OK.
Loading Labels in Trays 1-4
1. Remove all paper from the tray.
2. Load labels face up with the top edge of the page toward the rear of the tray.
3. Adjust the width guides until they touch the edges of the paper.
4. At the printer control panel, press the
2. Load labels face up with the top edge of the page toward the rear of the tray.
3. Adjust the width guides until they touch the edges of the paper.
4. At the printer control panel, press the
Menu button.
Note:
To navigate through the menu, use the
Up or Down arrow buttons.
5. Navigate to
Tray Settings, then press OK.
6. Navigate to the desired paper tray, then press
OK.
7. Navigate to
Paper Size, then press OK.
8. To select a setting, press the
Up or Down arrow buttons, then press OK.
9. To return to the previous menu, press the
Left arrow button.
10. Navigate to
Paper Type, then press OK.
11. Navigate to
Labels, then press OK.