Xerox Phaser 790 ユーザーガイド

9.  Installing user software in a Windows 95/98 environment

Xerox Phaser 790

9–12

1. 

Ensure that the printer is configured for parallel port printing. For
more information, refer to the chapters Connecting to the network
and Performing the setup from the Printer Control Panel.

2. 

To spool files directly to the printer, set Port Timeout in Seconds
to 10. To print directly to the Phaser 790, set Port Timeout in
Seconds to 5.

Setting this option to 10 seconds ensures that spooling is not
interrupted due to timeout.

3. 

At the workstation, perform the following to change the BIOS
settings:

a. 

Restart the workstation and press the key indicated on the

monitor as soon as the workstation starts up. You may have
to scroll through several screens to reach the parallel port
settings.

b. 

Set Parallel Port Mode to ECP.

c. 

Save the changed setting and exit.

4. 

Select the Start, Settings, and Printers.

5. 

Select the Phaser 790 printer icon and select Properties from
the File menu.

6. 

Select the Details tab. In the Print to the following port drop down
list, select LPT1: (ECP Printer Port).

If this box does not read LPT1: (ECP Printer Port), change the
port setting now, as described in the section To prepare the port
for parallel port printing and then return to this step. You may
need your Windows 95/98 system CD.