Xerox Phaser 3320 管理者ガイド
CentreWare Internet Services
Xerox Phaser 3320DN/3320DNI
System Administrator Guide
19
Change the Administrator Password
It is recommended that you change the default administrator password to a more secure password, so
this Xerox machine is not compromised.
this Xerox machine is not compromised.
To change the Administrator password:
1.
At your workstation, open the web browser and enter the IP Address of the machine in the
Address Bar.
Address Bar.
2.
Press Enter.
3.
Select the Properties icon.
4.
If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.
5.
Click Properties.
6.
In the Security link on the left hand side, select System Security.
7.
Select the System Administrator link.
8.
In the Access Control area:
a.
Ensure Web UI Access Control checkbox is selected.
b.
In the Login ID field, enter a new login name.
c.
Select the Change password box to change the password. In the Password field, enter a new
numeric password.
numeric password.
d.
Enter the password again in the Confirm Password field.
CAUTION:
Do not forget the password or you could be completely locked out of the system,
requiring a service call.
9.
Select Apply to save the changes.
10. Select OK when the acknowledgement message displays.
11. Select the Advanced button. The Advanced Access Control screen appears.
12. Select Protect Login IPv4 Address checkbox to enable this feature if required, and enter an IPv4
Address in the box.
13. Select the required option for the Login Failure Policy, for users who fail to login several times.
The options are: Off, 3 times or 5 times.
14. Select the required option for Auto Logout. The options are 5, 10, 15 or 30 minutes.
15. Enable Security Settings Reset if required.
16. Select Save to save your changes.
For further information, refer to
Administrator Accounts
on page 62.
Configure Wireless Connectivity Using Internet Services (Phaser 3320DNI)
1.
At your workstation, open the web browser and enter the IP Address of the machine in the
Address Bar.
Address Bar.
2.
Press Enter.
3.
Select Properties.
4.
If prompted, enter the Administrator User Name (admin) and Password (1111), and select Login.