Xerox Phaser 3010 ユーザーガイド
Troubleshooting
48
Phaser 3010/3040 Printer
User Guide
Symptom
Solutions
Streaks appear in the output.
Contact your Xerox representative.
The output has a mottled
appearance.
appearance.
Verify that the paper is the correct size, type, and weight. If not, change
the paper settings.
the paper settings.
Adjust the bias transfer roller. See
Adjusting the Bias Transfer Roller
on
Ghosting appears in the printed
output.
output.
Verify that the paper is the correct size, type, and weight for the printer
and that it is loaded properly. If not, change the paper.
and that it is loaded properly. If not, change the paper.
Change the Paper Type settings in the print driver.
On the Paper/Output tab in the Printing Preferences of the print driver,
change the Paper Type setting.
On the Paper/Output tab in the Printing Preferences of the print driver,
change the Paper Type setting.
Use the Printer Setting Utility to change the paper type to match
the paper.
the paper.
Adjust the bias transfer roller. See
Adjusting the Bias Transfer Roller
on
Adjust the fuser. See
Adjusting the Fuser
The printed output is foggy.
Clean the Developer. See
Cleaning the Developer
on page 53.