Xerox DocuTech 180 HighLight Color System ユーザーガイド

When directed by the screen message P09-447, HLC Waste Dry 
Ink Filter full, call for service or replace the waste dry ink filter.

CAUTION:  To prevent dry ink spills, remove the waste dry ink 
filter only when directed to do so by a message on the screen.

CAUTION:  Do not use warm or hot water, or general cleaning 
solvents to remove dry ink from your skin or clothing. The heat or 
solvent will set the dry ink and make it difficult to remove.
CAUTION:  If any dry ink should get on your clothes, brushing 
with a dry paper towel or a stiff-bristled brush may remove the ink. 
If not, launder your clothes with detergent and cold water. Tell a 
commercial dry cleaner that the spot is dry ink or "toner" so that 
they will not use a solvent that will set the dry ink stain.

The following steps must be performed to replace the waste dry 
ink filter:
1. Ensure that the printer has stopped printing.
2. Obtain a new filter. Open the box and remove filter from the 

bag and set aside.

3. Set a piece of paper larger than the filter on the top cover to 

the right of the Highlight Color module.

4. Open the top cover of the Highlight Color module.

5. Unsnap the 4 clips on top of the waste dry ink filter housing.